CATÁLOGO DE OFERTA PROFESIONAL INDUSTRIAL 2018
The Eco-Looftlighter lights a wood or charcoal fire, absolutely no need to use paper, firelighters or any other flammable fuel.
WARNING: do not use the Looftlighter in conjunction with any flammable fuel.
Quick: in just 60 seconds.
Safe: does not emit flame, simply hot air at 600 ºC.
As there is no need to use flammable fuels, there is no unpleasant smell affecting the atmosphere, barbecue or meal itself.
Be sure to use good quality coal or briquettes, as inferior quality can cause dangerous sparks.
Prepare your coal, briquettes or wood. Insert the Looftlighter close to the base of the pile and press the button to activate.
Hold the Looftlighter in this position until the first flame appears (20-30 seconds). Gradually draw the lighter away but keep aiming at the flame point for about another minute.
Finally, and as usual, you will need to wait approximately 20 to 30 minutes to start cooking on the hot coals. If you would like to speed up the process, use the Looftlighter air blower for 5 or minutes.
To light your fire in the fireplace with the Looftlighter, check that the chimney flue is open and prepare your base with a combination of kindling and larger pieces of wood. You can also place rolled up paper in between the thinner sticks of wood, although the Looftlighter can light up the kindling.
Use the end of the Looftlighter to touch the paper or kindling and switch on. Hold it in position until the first flame appears. Then gradually draw the Looftlighter away (about 20 cm) and keep pointing to the same area. The fire will be burning in less than 1 minute.